Raid 5 configuration step by step in windows 7

Click I Accept the license terms check box and click Next. On the next screen that is displayed, click Custom advanced option. On the following screen the hard disk configuration is shown. Here you can create partitions on the hard disk as per your requirement. Click next to create a single partition. Now the Windows installation will start.

Once the installation is complete following screen is displayed. You need to provide a password for the Administrator user. Click Ok to continue.

On the next screen type password for Administrator user. Re-type the same password in the confirm password field. The password should be minimum 8 characters. The password should contain a capital letter, a special character and small letter. P ssword. Once you provide the password click the Blue arrow button to continue. On the following screen click OK. Now Windows starts and following screen is displayed. Use Configure networking tab to assign IP address to the server.

Use Provide computer name and domain option to set a name for the server. Shut down the above virtual machine by clicking start button and select shut down.

In the window that opens, using drop down list select any reason as shown below. Click Ok to shutdown the Windows. Once the virtual machine is off, select Edit virtual machine settings option. The following window opens. Click Add button. It may prompt for administrator privileges, click yes. Following window opens. Select Hard Disk and click Next. Click Next on the following window. On the next screen select size of new hard disk as 20GB and also select option store virtual disk as a single file as shown below.

Click Next to select the default name for the hard disk file. Click Finish. This will create a new hard disk in the Virtual machine settings as shown below.

Repeat above steps to add 2 more hard disks to the virtual machine. After this the final virtual machine configuration should show 4 hard disks in the settings as shown below. Now click OK to close virtual machine settings window and click power on virtual machine to start virtual machine and boot windows. Once the windows starts, login as administrator. Once you login as administrator, click start and open run window. In the run window type diskmgmt. As the disk management utility opens the following screen is displayed.

The MBR disk allows you to have only 4 partitions. The GPT disk allows you to have more partitions. Make sure all the check boxes are selected. Click OK.

The disk management utility will display the new hard disks as shown below. The disk number may be different. In the options that are displayed as shown below, select New Mirrored Volume option. In the next screen that is displayed click Next to continue.

In the next window that is displayed select Disk 2 in the left side in Available section. The Add button will be enabled , click Add. The final setting will look as shown below. On the next screen assign a drive letter to the new volume created. On the next screen keep the default options. Make sure perform a quick format option is selected. Click finish to create and format the volume. A message is displayed to convert the hard disk from basic mode to dynamic mode.

Click Yes. RAID 1 can be created only when the hard disk are in dynamic mode. The OS will now create the volume and format it. The process may take some time. Once it finishes the volume is displayed as shown below.

Parity a calculated value that can be used to reconstruct data after a failure is also striped across the disk array. If a physical disk fails, the portion of the RAID 5 that was on that failed disk can be recreated from the remaining data and the parity. At least 3 disk will be required. About software RAID RAID is a technology that allows a volume partition uses together with the space on the multiple disks, in this way, disk's utilization and system performance can be improved.

How to set up s oftware RAID 1 step by step? To set up software RAID, do as following: 1. Then, open a window. Please tick another dynamic disk, and click "Add Mirror" button: 3. After completing, you will see the following screen. Two Methods Offered.

Still Need Help? Have your problem been solved? There are a number of options for a computer user to create RAID for redundancy of data. Setting up RAID 5 is kind of a complex task for anyone.

You can do this in Windows 8. So depending on the number of drives, if you have less than three drives with you. Although, if you want to create RAID 5, you must have three or more than three hard drives with you. To create RAID 5, you need three or more than hard drives, all of the same capacity. The other conditions for RAID 5 creation would be the drives have to be unformatted.

There can be different capacity drives to create the RAID. In such cases, the whole RAID setup will be dominated by the disk with least capacity. So it is recommended to avoid using different sized hard drives.

One of the most important thing to keep in mind should be the unformatted drives. In order to check that and confirm, you have to go for disk management. If there is a partition in any of them, you can delete the drive, but make sure that the data is backed up. Your drive is unallocated now and it can be used for RAID 5. To manage the storage for RAID 5, you have to go to the storage option in the control panel.